Skip to main content

Aluminium Sputter Target

Material ID: 1251

Description

This glittering object looks a bit like a small, silvery citrus reamer, but it hasn’t always had such a striking circular dimple: it actually started its life as a flat aluminium disk. During its time at the London Centre for Nanotechnology, daily use as part of a process called sputter deposition gradually wore away the metal. Eventually, this process carved a deep groove into the material, and the disk had to be taken out of commission. It has enjoyed a peaceful retirement on our shelves ever since, boasting a sparkling surface unlike any traditional aluminium finish. 

Sputter deposition is a nanofabrication technique used to make thin films and coatings just a few tens of atoms thick on a variety of samples and substrates. It is part of the larger group of physical vapour deposition techniques, whose broad principle involve ejecting atoms from the surface of a solid material, and then depositing them one by one onto the specimen to be coated. Sputtering is used to deposit thin films of various materials for a whole range of industrial applications: magnetic materials on disk drives, conductive metals on integrated circuits, antireflective layers on optical glass, and hard, protective ceramics on drill bits. In research labs across the world, you can sometimes find gold sputter-coated spiders, ants or pollen grains, as electronic microscopy techniques require samples to be coated with a thin conductive film before they can be examined. 

In the lingo of nanofabrication engineers, the object in our collection is known as a sputter deposition target; it is the source or supply from which the coating material gets removed. The target and the sample are placed on either side of a chamber, facing each other; a vacuum is then drawn into the chamber so that atoms of the target can travel to the sample in a straight line, without bumping into air molecules. A small amount of argon plasma is injected into the chamber: this is a state of matter like a very high-energy gas, where the atoms have been broken down into electrically charged ions. These ions are steered around in a circle close to the target using magnetic fields; as they collide into the surface of the target, these high-energy impacts dislodge some of the atoms of the target like a miniature game of billiards. Some of the ejected atoms land on the other side of the chamber, and a thin film of material builds up on the sample. 

Interestingly, this might be the purest aluminium sample we have in our collection. Pure aluminium is rarely found in the context of a general workshop, as it is too soft for most structural uses (it is used almost pure in high voltage power cables and in kitchen foil and food packaging). But in the context of a nanofabrication facility, mechanical strength takes a backseat to chemical purity. When nanofabrication engineers design microscopic electric components just a few hundred atoms thick, the flow of electricity and the performance of the device can be completely ruined if just a few of the atoms are not the same as the others.

Particularities

State

Categories

Chemical Symbol

Al

Maker

LESKER

Donated by

London Centre for Nanotechnology

Library Details

Site

Stratford

Status

In Library

Location

Wheelies

Form

Disc

Handling guidance

Locked in cabinet, handled under supervision. Wash hands after handling.

Date entered collection

Saturday 20th October, 2012

Keywords