Pillar Drills
How to access this tool
Drop-in use
Drop into the workshop during our opening hours to use this tool, but ask a technician if you need any training first.
Key information
Green tools are our general-use tools. These have either been demonstrated or explained in your New Members Induction, or are safe for use after a demonstration by a technician. Always ask a member of staff before using any green tools for the first time, or if you are not sure how to use these safely.
Pillar drills are designed to make accurate holes in material by lowering a quill with an attached drill bit into material clamped to a bed underneath.
Please note
This machine cannot be used with any materials that may create harmful dust. If you would like to drill hardened steel or other specialist materials, please speak to a technician first.
What can I use this tool for?
Pillar drills allow for more precise drilling than would be possible with a hand drill. Workpieces can be accurately clamped to the bed, the drill depth can be set down to the millimetre and you can also control the speed so that many different materials can be drilled at the correct RPM.
Materials used with this tool
- Various - Wood, Plastics, Some Metals
What training do I need to use this tool?
General use of the pillar drill is covered in the New Members Induction. Do not hesitate to ask a member of staff before using the pillar drill if you require a refresher after your induction.
Technical specifications
| Specification | Details |
|---|---|
| Chuck Capacity | 1 - 19 mm |
| Chuck Travel | 120 mm |
| Table Size | 350 x 350 mm |
| Maximum Throat Depth | 230 mm |
